Zupapa Dome Climber, Руководство пользователя

Страница: 16 / 28

1
2
3
4
5
15
(a) Start from a joint where the two part #B come across. Add another three part #B to the chosen joint with a part #E, a part #H,
and a part #K. Use the tools (part #I and part #J) to tighten them together.
STEP 3 - FINISH THE SECOND LAYER
• Add all poles anticlockwise.
• Insert all bolts from the inside of the dome climber and add the nut from the outside. That is,
insert the part #E into the preformed hole, fix it with the part #H and the part #K. See details as
shown below.
IMPORTANT
The following tips apply to all subsequent assembly steps.