12
Please understand that there is always a risk of injuries when using tools or doing technical work. The owner and the installer should
follow the guidelines below and take responsibility for any improper operations.
Before Assembling
1. At least two adults are required for the assembly.
2. Check and confirm you have all labeled parts according to the chapter
Parts List
. If you need any replacement(s), feel free to reach
out to Zupapa® Customer Happiness Executives (
official@zupapa.us
) with the ORDER NUMBER, PART NUMBER, REQUIRED
QUANTITY for each part, and photos or video clips (if applicable).
3. Wear the gloves during the whole assembly process.
4. Ensure all parts are dry before the installation.
5. Loosen the bolts of two joints next to it a bit if you feel a bit difficult to finish assembling the last joint of each layer
(
VERY IMPORTANT
).
Assembly Steps
From the bottom to the top, there are six steps.
STEP 1 - FRAME LAYOUT
Place
the 10 pieces of part #A (the long pole)
on a flat surface as shown below. You’ll see 10 joints after finishing this step.
1
2
3
4
5
6
7
8
9
10
Содержание Dome Climber
Страница 15: ... b Repeat until you finish assembling the 10 joints 14 ...
Страница 27: ......
Страница 28: ...PLAY ENJOY BOND ...