ZupAir ZULU, Руководство пользователя

Страница: 6 / 9

6
8. Once you are satisfied with your
control setup, bond the servos in place.
9. Using the black decals and tape,
secure the servo-wire in the slot.
10. Using a hobby knife or sand paper, file down the ends of the carbon joiners
to make for an easier fit.
11. Thread the servo extension wires from the wing junctions to the canopy.
Insert the 6mm carbon joiner tube and slide the wings into the pod.
12. Lock the wing in place with a screwdriver. If you plan on doing discus
launches, tape may also be necessary to keep the wings from sliding apart.