011319-03
3
Technical instructions
Z22
2.- Dismantling and change motor
2.1.- Fist of all, we must lay the machine down and remove 4 screws that fixes the base to the
housing. There are two screws that you see at first sight but another 2 are under the rubber
feet. We must remove both rubber feet and we will find the other two screws, then remove
them too.
*Very im
portant; before removing the plastic base don’t forget to make a reference mark that
show us which is the correct position.
2.2.
Once the base is removed we have to unscrew four screws of the fixed guideway and remove
also four springs that fasten this fixed guideway to the mobile guideway just under the fixed
one, that one has the micro-switch attached. After removing the springs
(Be highly careful
not to let the springs fall into the motor fan)
