Zummo NATURE ONE Z40, Руководство пользователя

Страница: 33 / 107

5.3. IDENTIFYING DAMAGES
Damage Cause and/or solution
The display is not lit No power supply.
Fuse burnt out (Fig. 21).
Power cable not properly connected.
Switch power on (Fig. 5).
The display shows
message Error Front cover not fitted correctly (Fig. 24).
Tray not assembled or incorrectly assembled (Fig.25-26).
Side covers not fitted correctly (Fig. 24).
Chutes incorrectly positioned.
Basket incorrectly positioned.
Overheating motor.
See section SAFETY SYSTEMS.
The display shows
message Error and a
flashing Icon. Check if the fruit is frozen.
Check for piled-up fruit peels inside the Juice tray.
Check to see if the orange peels are stuck to the inside of the Cups.
The skin of the fruit may be too thick.
Blocked machine To unblock the machine, use the 5mm Allen key located at the right
of the lower lid. Insert it into the hole on the right side and, with the
machine switched off, turn anticlockwise until the cups are raised,
removing the obstruction. WARNING: Make sure the Allen key is
removed before switching the machine on.
Blade breaks Cup nuts are too loose.
Balls are loose.
The filter cleaner is not
removing the pulp from
the filter A piece of fruit peel is preventing the movement of the pulp scraper
filter.
The filter set has been assembled in reverse. Check that the drive
shaft dovetails properly with the hexagonal actuator (Fig. 15-16).
Not enough juice is
being extracted from the
fruit Fruit peel is too thin.
Hooper is not delivering
fruits so the squeezing
area Fruit is too big.
Hopper not properly assembled. See cleaning the feeder in section
cleaning.
Hooper is delivering
several fruits at the
same time into the
squeezing area Fruit is too small.
Hopper not properly assembled. See cleaning the feeder in section
cleaning.
For any advice or to request spare parts, you should state the model and serial number
of your machine (Fig. 23).
33