Assembling the NucleoTNC
These are the parts needed in order to use the MMDVM-Nucleo board with the NucleoTNC
firmware.
QTY
Part Name
Manufacturer
Part number
Link
1
MMDVM-Nucleo
ZUMRadio
MMDVM-Nucleo 1.0.2
1
NUCLEO-L432KC
ST Micro
NUCLEO-L432KC
2
2.7K Resistors 1/4W
Stackpole
CF14JT2K70
1
I2C EEPROM
Microchip
24LC32A-I/P
1
Interface Board
OSH PARK
MMDVM_nucleo_TNC_0
The first two images below show the Nucleo-L432 board as well as the EEPROM and resistors
mounted on the top of the board and soldered on the bottom of the board. These components
need to be soldered first since the MMDVM-Nucleo board will cover the pads. Make sure to
trim the leads as short as possible to prevent the possibility of them shorting against the
bottom of the MMDVM-Nucleo board.