Placing a Call
Answering a Call
Ending a Call
Call Mute and Un-mute
Redial
Call Hold and Resume
To place a call on hold:
Using the handset:
Using the speakerphone:
Using the headset:
Using the handset:
Using the speakerphone:
Using the headset:
Using the handset:
Using the speakerphone:
Using the headset:
1. With the handset on-hook, enter the number.
1. Pick up the handset.
2. Then press or the
Send soft key.
1. With the headset connected, press
to activate the headset mode.
2. Enter the number, and then press the
Send
soft key or .
2. Enter the number, and then press the
Send soft key or .
Pick up the handset.
Press
or the
Answer soft key.
Hang up the handset or press the
End Call
soft key.
Press
or the
Answer soft key if headset mode is active.
Press
or the
End Call
soft key.
Press the
End Call soft key.
Press
to enter the
Placed Calls list, press
or
to select the desired entry, and then press
or the
Send soft key.
Press twice when the phone is idle to dial out the last dialed number.
To resume the call, do one of the following:
Press to mute the microphone during a call.
Press again to un-mute the call.
If there is only one call on hold, press
or the
Resume soft key.
Press or the
Hold soft key during an active call.
Basic Call Features
Note:
During a call, you can alternate between the headset, hands-free speakerphone and handset modes by
Note:
You can reject an incoming call by pressing the
Reject soft key.
pressing the
HEADSET key, the Speakerphone key or by picking up the handset.
4
--Alternatively-- Enter the number and then lift the handset to initiate the call.
