Zultys BPS12 Скачать руководство пользователя страница 6

Страница: 6 / 44

BPS12 Hardware Manual

Warning

Read and understand the installation instructions before you install the equipment

or connect it to its power source.

1.1.3

What this Manual Includes

This manual provides detailed information and instructions on the hardware and proper

installation of the BPS12 Battery Power Supply. It provides ordering numbers and descriptions for

parts that are sold directly by Zultys.
The manual describes how you should receive the product, how to obtain service and support,

warranty information on the BPS12, a description of the front and panels, installation procedures,

and maintenance instructions.

1.1.4

What this Manual Does Not Include

This manual does not describe the features and functionality of the BPS12. The manual does not

discuss technology details, pricing, names of sales representatives, or names of distribution

channels.
Access the Zultys web sites for all further information. Zultys is very open about its products and

most of the manuals are available on line at:

http://www.Zultys.co.uk

UK and Ireland

http://www.Zultysau.com

Australia

http://www.Zultys.co.nz

New Zealand

http://www.Zultys.com.cn

China

http://www.Zultys.com

USA, Canada, and all other countries

1.2

Ordering Information

Figure 1-1 shows the ordering numbers for BPS12 hardware.

Figure 1-2 lists the accessories included with the BPS12.

Zultys
Part

Description

90-05020

BPS12 with Battery Power Cable and power cord for North America, Taiwan, and Japan

90-05021

BPS12 with Battery Power Cable and power cord for UK and Hong Kong

90-05022

BPS12 with Battery Power Cable and power cord for continental Europe (Schuko plug)

90-05023

BPS12 with Battery Power Cable and power cord for Australia and New Zealand

90-05024

BPS12 with Battery Power Cable and power cord for Israel

90-21004

Battery Power Cable

35-10008

10 Amp Fuse

35-10009

16 Amp Fuse

Figure 1-1

Ordering Numbers for BPS12 Hardware

Содержание BPS12













































Результаты поиска

Содержание BPS12

Отзывы:

Похожие инструкции для BPS12

Бренды по названию

Популярные бренды

Zultys BPS12, Руководство по оборудованию

Результаты поиска

Содержание BPS12

Отзывы:

Похожие инструкции для BPS12

Бренды по названию

Популярные бренды