Instruction Manual
www.kraftool.hk
|
12
Possible malfunction
Possible reason
Action to eliminate
The product does not turn on
No mains voltage
Check the mains voltage
Defective switch, motor or other
component
Contact the service center for repair or
replacement
Jamming of a blade or mechanism
Release the blade, adjust the tension (see
Assembly section), clean the wheel cover or
contact the service center for repair
The product turns on, but does not work
at full power
Low mains voltage
Check the mains voltage
Burned winding or break in the motor
winding
Contact the service center for repair
Defective switch, motor or other
component
Contact the service center for repair or
replacement
Jamming or slipping of the blade
Replace the saw blade (see Assembly section)
The product or the blade stopped
during operation
The mains voltage was lost
Check the mains voltage
Jamming, slippage or breakage of
the blade
Adjust the blade tension or clean the wheel
cover. Adjust the blade limiters (see Getting
Started section)
Defective switch, motor or other
component
Contact the service center for repair
Unsatisfactory sawing result
The saw blade is blunted or damaged
(curved, lost teeth, cracks)
Replace the blade (see Assembly section)
The blade slips on wheels
Adjust the position of the blade (see Assembly
section)
Increased swinging of the blade
Contact the service center for repair
Insufficient motor power or speed (see
malfunction 2 above)
Perform actions on malfunction 2
The product overheats
Intensive operation mode, work with
maximum load
Change the operating mode, reduce the load
High ambient temperature, poor
ventilation, blocked ventilation orifices
Take measures to reduce temperature, improve
ventilation, clean ventilation orifices
Lack of lubrication, wedging in the
mechanism
Contact the service center for repair
Burned winding or break in the motor
winding
Contact the service center for repair
Band Saw Article
Blade Article
Name
Features
ZPL-
350-190
155810-190-2
Band Saw 3Y6P
L-1425mm, Н-8,0mm, teeth pitch-2mm
(12ТРI), carbon steel-65
ZPL-
350-190
155810-190-4
Band Saw 3Y6P
L-1425mm, Н-8,0mm, teeth pitch-4mm
(6ТРI), carbon steel-65
ZPL
-305
155815-305-2
Band Saw 3Y6P
L-2
320
mm, Н-1
2
,
7
mm, teeth pitch-
4
mm
(
8
ТРI), carbon steel-65
ZPL
-305
155815-305-4
Band Saw 3Y6P
L-2
320
mm, Н-1
2
,
7
мм, teeth pitch-
6
мм
(
4
ТРI), carbon steel-65
POSSIBLE MALFUNCTIONS AND METHODS OF THEIR ELIMINATION
SAWING BLADES
