10
1.
Without written modification from you to SERIART G2 within 24 hours conditions above are considered as agreed and accepted
MOD. 47 rev .03 Car tiglio
25-03-2015
Overlay
ZUBLER
Leonardo Senofieni
Polyplate
date
description
customer
product line
drawing by
ATTENTION !!! this drawing may contain modifications necessar
y to the technical feasibility of the ar
ticle
Glossy P olicarbonate 175m
like Alicia
Material 1
Material 2
ZUBFROPOL0000
glossy/matt
Acrilyc Adhesive
like Alicia
Chrome - lik e Alicia button
Ral 7011
HKS 15
Matt br ushed - lik e Alicia
Glossy tansparent
Colors
Finish
Code
modif. rev01
date
sheets
deliver y
notes
General tollerance
±0.2
MATT ZONE
GLUE ZONE
EMBOSSED
GLOSSY ZONE
NO GLUE ZONE
11.50 mm
15.50 mm
T2
T3
L3
T1
L1
L2
12
T4
5 0
.
Operation
The motor handpiece
2
is started by pres-
sing the knee plate
19
. Due to the wide
range of movement you can control the
speed finely.
Automatic speed control function
The automatic speed control function is
activated by pressing pushbutton
T1
.
LED
L1
lights up. The motor handpiece 2
starts when the knee plate
19
is pressed
and remains at the desired speed.
After 3 seconds without a change, the
speed of the motor handpiece
2
remains
at the desired speed even without pres-
sing the knee plate
19
. The motor hand-
piece stops when the knee plate
19
is
pressed again, or when the pushbutton
T1
is pressed.
The automatic speed control function is
switched off by pressing the pushbutton
T1
again.
Switch the controller on by the mains
switch
11
.
The speed display
12
indicates the prese-
lected speed. You can change the speed
with the plus pushbutton
T4
or the minus
pushbutton
T3
.
1.1 Handling the VARIOstar K50 knee controller
12 Digital speed display
L1 LED Automatic Speed
Control
L2 LED safety switch
L3 LED anticlockwise rotation
T1 Automatic speed control
T2 Safety switch
T3 - pushbutton / anticlockwise
rotation
T4 + pushbutton / clockwise
rotation
Fig. 9
Page
