Turbo LCD program card is only applied to Turbo series brushless ESC produced by ZTW Model.
Users can choose their desired parameter at any time. It has 2 use methods as follows:
1. Working as an individual device to set the parameters; 2.Working as an USB adapter to update
the firmware and set the parameters on PC.
Specification
Dimension: 91mm*54mm*18mm (L*W*H)
Weight: 68g
Power supply: DC 5.0V~12.0V
How to connect the LCD program card
1. Disconnect the battery from the ESC;
2. Disconnect the signal wire of the ESC from the receiver; then plug it into the socket marked
with( )
3. Connect the battery to the ESC and turn on the ESC.
4. If the connection is correct, the following message（ZTW Turbo +Date）will be
displayed on the LCD screen. Press any buttons, the following message (Ready to connect
ESC)will be showed on the LCD Screen. It signifies that the data connection between LCD and
ESC is establishing.
If the data connection between LCD and ESC is failed, the LCD Screen is always showing
(Ready to connect ESC); Please check whether the signal wire is connected correctly and
repeat step1,2 ,3.
5. If the connection is established successfully, the first programmable item will be displayed on
LCD screen. It’s ready to set the parameters now.
Note: Please strictly connect according to the above sequence. The sequence of step 2 and
step 3 can not be reversed. Otherwise, the LCD program card will not work properly.
Operation
Working as an individual device to program the ESC, the function of button is as follows:
Menu
Change the programmable items circularly;
Value
Change the parameters of each programmable item circularly
Note
Keeping the “Menu” or “Value” button holding can select the desired parameters quickly.
Reset
Return to the default settings
OK
Save the current parameters into the ESC. If you don’t press “OK” button, the
Turbo LCD Program Card
