background image

under use. 

 

During  charging,  if  peculiar  smell  is  smelt  or  the  temperature  is  too  high,  please  stop  charging 

immediately and send it back to sales department of maintenance department. 

 
 
 
 
 
 

WARNING! 

The attached cables of the battery charger can be used for the battery-charger only! 

 

About riding 

 

 
Once you have completed the initial charge you are ready to ride. You must be aware of 
all  local  laws  and  ordinances that  govern  and/or restrict  the  use  of  electric  scooter.  The 
laws  and  ordinances  vary  greatly  from  municipality  to  municipality.    It  is  your 
responsibility to know and abide by your local restrictions.  
 
To ride, turn the power switch lock to the “on” position. The power switch is located on 

the front bottom of the seat.  The battery gauge and the power indicator located at the panel will illuminate when 
the power is on.  
 
Hold  onto  the  handlebars  with  both  hands.  Assume  a  well-balanced  position  on  the  scooter  and  push  off  with 
your foot. Your right hand will control the accelerator.  Twist the accelerator slowly to avoid a sudden rush of 
speed forward. The speed of the scooter will increase as you twist the accelerator more.  Release the accelerator 
and apply the brakes to stop your scooter.  You will control the speed of the scooter by using both the accelerator 
and the brakes. When the brake handle is squeezed it cuts power to the accelerator.  

 

 

 

Matters need attention during journey 

 

For economic use of battery and motor, please use your feet to assist driving when the scooter is started 

or climbing, prolonging the life time effectively. 

 

When the scooter is started just now, the  scooter should be accelerated slowly to avoid wasting power 

during instantaneous speed-up or damaging electrical parts. It is better to drive with assistance of feet. 

 

On  the  precondition  of  safety,  he  should  try  his  best  not  to  brake  or  start  too  much  in  order  to  save 

power. 

 

The controller of the scooter has the function of over-load protection. If it is over-loaded, the power will 

be cut automatically, when everything goes back to normal, the power will be connected automatically. 

 

During  driving,  it  should  be avoided  that  holding  the  speed-adjusting  handle  after  braking,  to  prevent 

damaging the machine part or motor by over-load (stuck rotation) of electrical motor. 

 

The  maximum  carrying  capacity  is  110kg,  it  is  better  to  ride  under  the  rated  carrying  capacity  110kg 

(including the driver). Do not drive overspeed. 

Matters need attention for parking 

 

When  you  get  off  the  scooter  and  push  it  forward,  the  power  switch  should  be  shut  off  to  avoid 

unintentional turning on the handle and the accident can be avoided by sudden start-up of the scooter. 

 

It is suggested that the scooter should be parked indoor or within carport. Don’t forget to shut off power 

and take off the key. 

 

In  public  places,  the  scooter  should  be  parked  in  the  regulated  spot  according  to  traffic  regulations. 

Содержание ZT-27












Отзывы: