Chapter 6
Fat AP Commissioning
Instruction
When the ZXWL W822E is in fat AP mode, it needs to be connected and configured.
AP Connection
Perform the following steps to connect the ZXWL W822E:
1.
Power on the device by referring to the Power Supply section.
2.
Connect the device to a debugging PC through a network cable, and start the
debugging PC.
3.
Configure the IP address of the debugging PC. Ensure that the ZXWL W822E and the
PC are in the same network segment.
Perform the following steps to configure the PC:
a.
Select
Start> Control Panel> Network Connection
. The
Network Connection
window is displayed.
b.
Right-click
Local Area Connection
and select
Properties
.
The
Local
Connection Properties
dialog box is displayed.
c.
Double-click
Internet Protocol (TCP/IP)
. The
Internet Protocol (TCP/IP)
Properties
dialog box is displayed, see
Figure 23
.
6-1
SJ-20130807102306-001
ZTE Proprietary and Confidential
