Chapter 2 - Product Installation
Problem
Troubleshooting
LAN indicator is
OFF when the
Ethernet cable is
connected.
Make sure that the Ethernet cable is connected properly to
the computer and the W300. Make sure that the device and
computer are all powered on.
WLAN unable to be
connected
Make sure that the WLAN indicator is ON. Make sure that
the wireless NIC is set properly. Check the network name,
encryption mode, and encryption key to see whether they
match the settings of the W300.
PC unable to access
the network
Use the ping command to check if the IP address of the
network port of the W300 (192.168.1.1 by default) can
be pinged from the computer. If it cannot be pinged
successfully, check the Ethernet connection and see if
the indicator status is normal.
It is recommended that the local IP address and DNS
server address are set to be obtained automatically.
It is recommended to close all the running firewall and
VPN software.
Disable the proxy server setting of the web browser
(e.g., IE).
The failure reason may be that the office-end devices
of the ADSL service provider are being upgraded or in
maintenance.
Proprietary Information of ZTE CORPORATION
57
Содержание ZXV10 W300
Страница 66: ...Chapter 2 Product Installation This page is intentionally blank Proprietary Information of ZTE CORPORATION 55 ...
Страница 77: ...Proprietary Information of ZTE CORPORATION 66 ...
Страница 78: ...Chapter 2 Product Installation This page is intentionally blank Proprietary Information of ZTE CORPORATION 67 ...