Use custom
filename
The phone will use custom filename specified in XML server
path if set to “Yes”. The default setting is “No”.
Idle Screen
XML Server
Path
Specify the idle screen XML server path.
Offhook
Auto Dial
To configure a User ID/extension to dial automatically when the
phone is taken offhook.
Syslog
Server
The IP address or URL of System log server. This feature is
especially useful for ITSPs.
Syslog
Level
Select the ATA to report the log level. Default is NONE. The
level is one of DEBUG, INFO, WARNING or ERROR. Syslog
messages are sent based on the following events:
product model/version on boot up (INFO level)
NAT related info (INFO level)
sent or received SIP message (DEBUG level)
SIP message summary (INFO level)
inbound and outbound calls (INFO level)
registration status change (INFO level)
neg
otiated codec (INFO level)
Ethernet link up (INFO level)
SLIC chip exception (WARNING and ERROR levels)
memory exception (ERROR level)
The Syslog uses USER facility. In addition to standard Syslog
payload, it contains the following components:
GS_LOG:
[device MAC address][error code]
error message.
For example
: May 19 02:40:38 192.168.1.14 GS_LOG:
[00:0b:82:00:a1:be][000]. Ethernet link is up.
Send SIP
Log
When setting the “Yes”, phone will send out SIP Log to syslog
server. Default setting is “No”.
NTP server This parameter defines the URI or IP address of the NTP
(Network Time Protocol) serve. It is used to display the current
