NOTE:
If you have a SIP Server configured, a Direct IP-IP still works. If you are using
STUN, the Direct IP-IP call will also use STUN. Configure the “Use Random
Port” to “No” when completing Direct IP calls.
Answering Phone Calls
Receiving Calls
1. Incoming single call:
Phone rings with selected ring-tone. The
corresponding LINE flashes in red. Answer call by taking Handset off
hook or pressing SPEAKER or HEADSET or by pressing the
corresponding account LINE button.
2. Incoming multiple calls:
When another call comes in while having an
active call, the phone will produce a Call Waiting tone (stutter tone).
Answer the incoming call by pressing its corresponding LINE button.
The current active call will be put on hold.
Do Not Disturb
Do Not Disturb can be enabled/disabled by pressing the MUTE/DND button
on the phone. Or users could set it from the MENU following the steps below.
1. Press the MENU button and scroll down to “Preference”.
2. Select “Do Not Disturb” by pressing menu button.
3. Use arrow keys to either enable or disable “Do Not Disturb” feature.
4. When enabled, there will be a special ‘Do Not Disturb” icon appearing
on the display. This will send the incoming caller directly to voicemail.
Phone Functions During a Phone Call
Call Waiting/Call Hold
1. Hold:
Place a call on ‘hold’ by pressing the “HOLD” button.
2. Resume:
Resume call by pressing the corresponding blinking LINE.
