Zte ZXR10 ZSR, Руководство по настройке

Страница: 40 / 313

ZXR10 ZSR V2 Configuration Guide (IPv6)
Command Function
ZXR10#
debug ipv6 nd6
Turns on all the debugging
function switches related to the
ND protocol.
ZXR10#
show debug nd6
Displays the ND6 protocol
debugging switches that have
already been turned on.
– End of Steps –
3.3 NDP Configuration Example
Configuration Description
This example describes how to configure static entries in the NDP neighbor cache table
of the interface gei-1/1 on a router.
Configuration Flow
1. Enter the interface configuration mode, and add a static entry to the neighbor cache
table.
2. Show the content of the neighbor cache table, and check whether the static entry has
been successfully added.
Configuration Commands
Configuration on the router:
ZXR10(config)#interface gei-1/1
ZXR10(config-if-gei-1/1)#no shutdown
ZXR10(config-if-gei-1/1)#nd6 add 780::1 0000.0a00.1345
Configuration Verification
Assume that the echo information on the router before configuration is as follows:
ZXR10#show nd6 cache
Total Cache Number Is:1
Only Current Valid Items Are Shown Below:
Address Link-Address Age Status Interface
3ffe:100::2 0023.e422.1134 23h56m2s Stale gei-1/1
The configuration on the router is verified as follows:
ZXR10#show nd6 cache
Total Cache Number Is:12
Only Current Valid Items Are Shown Below:
Address Link-Address Age Status Interface
3-6
SJ-20140504150128-018|2014-05-10 (R1.0) ZTE Proprietary and Confidential