Chapter 14 IPv6 PIM-SM Configuration
R2(config-mcast-ipv6-pim)#interface gei-0/7
R2(config-mcast-ipv6-pim-if-gei-0/7)#pimsm
R2(config-mcast-ipv6-pim-if-gei-0/7)#dr-priority 20
R2(config-mcast-ipv6-pim-if-gei-0/7)#end
R2#configure terminal
R2(config)#ipv6 route 198::/64 199::1
Configuration Verification
Execute the
show ipv6 pimsm interface
command on R1 to check the interface state, as
shown below.
R1(config)#show ipv6 pim interface
Interface
State Nbr
Hello
DR
PIM
Mode
Count Period Priority
Silent
gei-0/7
Up
0
30
20
Disabled
S
Address: fe80::2d0:d0ff:fe06:606
DR
: fe80::2d0:d0ff:fe06:606
gei-0/9
Up
1
30
1
Disabled
S
Address: fe80::2d0:d0ff:fe06:606
DR
: fe80::2d0:d0ff:fe06:606
Execute the
show ipv6 pim neighbor
command on R1 to check the neighbor state, as shown
below.
R1(config)#show ipv6 pim neighbor
Neighbor Address(es)
Interface
Uptime
Expires
DR Pri
fe80::211:12ff:fe51:ea12
gei-0/9
01:02:30
00:01:19
1
Execute the
show ipv6 pim bsr
command on R1 to check the BSR state, as shown below.
R1(config)#show ipv6 pim bsr
BSR address: 100::1
Uptime: 00:17:48, BSR Priority :0, Hash mask length:126
Expires:00:01:22
No candidate RP information!
Execute the
show ipv6 mroute
command on R1 to check the IPv6 multicast routing table.
R1#show ipv6 mroute
IPv6 Multicast Routing Table
Flags:NS:SPT upsend,RT:Reg upsend,F:Forward,
NTP:NTP join,DPU:Damping enable,DPD:Damping del,
(198::2, ff1e::1), TYPE: DYNAMIC, FLAGS:
Incoming interface: gei-0/7, flags:
Outgoing interface list:
gei-0/9, flags: F
14-9
SJ-20140504150128-018|2014-05-10 (R1.0)
ZTE Proprietary and Confidential
Содержание ZXR10 ZSR
Страница 12: ...This page intentionally left blank IV SJ 20140504150128 018 2014 05 10 R1 0 ZTE Proprietary and Confidential ...
Страница 306: ...Figures This page intentionally left blank IV SJ 20140504150128 018 2014 05 10 R1 0 ZTE Proprietary and Confidential ...
Страница 308: ...This page intentionally left blank VI SJ 20140504150128 018 2014 05 10 R1 0 ZTE Proprietary and Confidential ...