Zte ZXR10 GER, Руководство пользователя

Страница: 242 / 412

ZXR10 GER (V2.6.03) General Excellent Router User Manual Volume-I
220 Confidential and Proprietary Information of ZTE CORPORATION
isis metric <metric-value> [level-1|level-2] in IS-IS
interface config mode as shown in Table 274.
T
A B L E
2 7 4 I
S
- I
S
M
E T R I C
C
O M M A N D
Command Format
Command
Mode Command Function
isis metric <metric-
value> [level-
1|level-2]
IS-IS
interface
config
This defines the metric
value of an interface
The <metric-value> ranges from <0-16777214> and divides
into two modes: Narrow mode (0-63); wide mode (0-
16777214).
Result: This configures metric value of an interface.
6. IS-IS configure CSNP interval in order to set the interval
between CSNP packets, use command isis csnp-interval
<num> [level-1|level-2] in IS-IS interface config mode as
shown in Table 275.
T
A B L E
2 7 5 I
S
- I
S
C
S N P
C
O M M A N D
Command Format
Command
Mode
Command Function
isis csnp-interval
<num> [level-
1|level-2]
IS-IS
interface
config
This defines CSNP packet
sending interval
In a broadcast network, the default value of <num> is 10.
In point to point network default value of <num> is 3600.
Range is from (1-65535).
Result: This configures CSNP packet interval.
E
ND OF STEPS
For More information about IS-IS configuration please follow the
below procedures.
Configuring IS-IS Authentication
ZTE ZXR10 GER supports four types of IS-IS authentication.
„
Inter-neighbor authentication
„
Intra-area authentication
„
Inter-area authentication
„
Inter-SNP authentication
At present, ZXR10 GER only supports plain text authentication.
This below procedure delivers information about how to do
authentication in IS-IS protocol on ZTE ZXR10 GER.
Related
Information
Overview
Purpose