Chapter 6
ZXR10 1800-2E Chassis
ZXR10 ZSR V2 series routers have a modular structure. The boards and components
support hot swapping and have flexible expandability.
A ZXR10 2800-3E chassis is
composed of a subrack, a backplane, a controlling and transferring unit, line interface
boards, power modules, and fan modules.
A ZXR10 1800-2E subrack has a sheet metal structure. The controlling and transferring
unit and fan modules are fixed on the router, service board and power modules are installed
at the back, cables are led out from the back, and two line interface boards can be installed.
A ZXR10 1800-2E chassis has a standard width of 19" and can be installed into a standard
IEC297 cabinet or an
cabinet.
A ZXR10 1800-2E(G) submodel can be derived from a ZXR10 1800-2E chassis by
expanding the wireless function module. A ZXR10 1800-2E(G) has a 3G or LTE module
inside and a slot for a SIM card on the panel, supporting a GSM, WCDMA, TD-SCDMA,
or LTE network.
Table of Contents
6.1 Structure
6.1.1 Overview and Structure
Overview
A chassis of a ZXR10 1800-2E router has a height (without the antenna) of about 1 U
(1U=44.45 mm), and a dimension of 442 mm × 44 mm × 440 mm (width × height × depth).
For its components and descriptions, refer to
.
Table 6-1 Main Components of a ZXR10 1800-2E Chassis
Component
Description
Controlling and transferring
board
The controlling and transferring board of a ZXR10 1800-2E chassis
is integrated on the router and cannot be plugged or unplugged.
Board
The ZXR10 1800-2E chassis provides two slots for line interface
boards.
Power module
The ZXR10 1800-2E chassis provides two slots for one or two
power modules.
6-1
SJ-20150204153047-004|2015-03-30 (R1.0)
ZTE Proprietary and Confidential