Zte ZXHN H368C, Руководство пользователя

Страница: 16 / 25

ZXHN H368C User’s Manual
10
Connection procedures
1 Power off the equipment before all the other devices are connected.
2 Connect the network cables: Insert the RJ-45 Ethernet cable connector
into the Ethernet interface of the ZXHN H368C, and connect its other
terminal to the Ethernet adapter of the customer computers or ports of other
network devices.
3 Connect the splitter
The splitter has three interfaces, which are described as follows:

LINE: Connect the user telephone cable (RJ11 interface).

MODEM (or DSL): Connect the DSL interface of the ZXHN H368C.

PHONE (or TEL): Connect the phone sets.
The installation process is as follows: Connect the LINE interface of the
ZXHN H368C to the MODEM(or DSL) interface of the splitter using the
RJ-11 telephone cable, connect the phone set lines to the PHONE(or TEL)
interface of the splitter, and then connect the user telephone cable port to the
LINE interface of the splitter.
4 Connect the MoCA port to a Set-Top box with a coaxial cable for
multimedia.
5 Connect the power
Connect one terminal of the power adapter to the POWER interface of the
ZXHN H368C, and the other terminal to the socket on the wall, and then
switch on the power of the ZXHN H368C equipment.
Checking all connection cables
Check all connection cables following the below procedure.
1 Check the DSL cable connection
If the DSL LED is on upon power-on of the ZXHN H368C, it indicates that
the DSL line is correctly connected (Generally it takes one to two minutes to
perform the DSL connection).
2 Check the computer connection