Zte ZXHN H298, Руководство пользователя

Страница: 18 / 21

5
Troubleshooting
The Power indicator on the front panel is off after the power button is pressed.

Power switch does not turn on.

The power adapter is not correctly connected to the device. Be sure to user
the power adapter supplied with the device.
The Broadband indicator on the front panel is off after the device is powered on.

The WAN link is not established.

The Ethernet cable is not correctly connected to the WAN interface.

Please contact the service provider for help.
Unabled to connect to the network..

Check that the Ethernet cable is correctly conneted to the WAN interface and
the Ethernet cable is correctly connected to the LAN interface.

Check that the WAN indicator on the front panel is on and the Internet indi-
cator on the front panel is solid green or flashing green.
Restore the factory default settings.
After the power is on, use a needle to press the Reset button for over 5 seconds
to restore the default factory setting.
6
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.