Zte ZXHN H2640, Руководство по управлению техническим обслуживанием

Страница: 82 / 116

ZXHN H2640 Maintenance Management Guide(TIM)
5-22 SJ-20200714160642-002 | 2020-07-27(R1.0)
This procedure describes how to enable the FTP feature of the ZXHN H2640 by
configuring FTP parameters, including the username and password.
1. In the left navigation tree, click Local Network > FTP . The FTP Application page is
displayed, see Figure 5-24 .
Figure 5-24 FTP Page
2. Set the parameters. For a description of the parameters, refer to Table 5-18 .
Table 5-18 FTP Server Parameter Descriptions
Parameter Description
Server Enable or disable the FTP server feature .
FTP Username/FTP
Password
Username and password used to connect to the FTP server.Valid
only if FTP security control is enabled.
3. Click On to enable the FTP server feature ,and click Apply button to apply the
changes.
5.6 Configure the UPnP
This page provides the parameters of UPnP configuration features.
Configuring the UPnP
1. On the main page of the ZXHN H2640, select Local Network > UPnP to the UPnP ,
see Figure 5-25 .
Steps
Abstract
Steps
Abstract