Zte ZXHN H2640, Руководство по управлению техническим обслуживанием

Страница: 66 / 116

ZXHN H2640 Maintenance Management Guide(TIM)
5-6 SJ-20200714160642-002 | 2020-07-27(R1.0)
Table 5-4 lists the access control-mode configuration parameters.
Table 5-4 Access Control-Mode configuration parameters
Parameter Description
No Filter No filter is to be applied (the default).
Black List Deny LAN users to access specific address.
White List Allow LAN users to access specific address.
4. Click Apply button to apply the changes.
Configuring the Access Control-Rule Parameters
5. Click Access Control-Rule Configuration to the configuration page, see Figure
5-6 .
Figure 5-6 Access Control-Rule Settings
6. Configure the access control-rule configuration parameters. Table 5-5 lists the access
control-rule configuration parameters.
Table 5-5 Access Control-Rule Configuration parameters
Parameter Description
Name The name of Access Control Item.
SSID
SSID name corresponding to the wireless network that the
rule is applied to. The default value is SSID1.
MAC Address
The MAC address of the wireless device.
We suggest to set the MAC addresses in access control list
using a wireline connected device.
Modifying the list using a wireless device may cause
unexpected disconnection of the device used.