ZXHN H1600 Maintenance Management Guide
Parameter
Description
On Demand
Auto-disconnected without traffic
Setting this parameter when
Connection Mode
is
On De-
mand
.
NAT Switch
Select on/off NAT switch function.
5. On the main page of the ZXHN H1600, select
Internet > Status > 3G
to the
3G
Working Mode
Figure 5-12 3G Working Mode
6. Set the parameters and click
Apply
. For a description of the parameters, refer to
.
Table 5-5 3G Working Mode parameters
Parameter
Description
3G Mode
Enables or disables the 3G Working function.
Backup Interval
Sets the interval after which services are switched to the
standby line when the active line is interrupted.
Recovery Primary Uplink Interval
Sets the interval after which services are switched back to
the active line when the active line is recovered.
Result
On the main page of the ZXHN H1600, select
Internet > Status > 3G
to the
3G Con-
nection Status
page, as shown in
.
5-16
SJ-20200218145027-006 | 2021-03-04(R1.0)