Chapter 3
Configuration Prepara-
tion
Table of Contents
Configure TCP/IP...........................................................................................................3-1
Login...............................................................................................................................3-2
This manual uses the Windows operating system as an example for describing how to
configure the ZXHN H1600. Before configuring the ZXHN H1600, you need to perform
the following operations:
Ensure that a crossover or straight-through Ethernet cable connects a computer to
the device.
Ensure that the TCP/IP configuration on the computer is correct.
Stop any firewall or other security software operating on the computer.
Disable the proxy setting of Internet Explorer.
3.1 Configure TCP/IP
To log in to the ZXHN H1600 on a computer, you need to set the IP address of the com-
puter to ensure that the IP address of the computer and the maintenance IP address of
the ZXHN H1600 are in the same network segment.
Context
The default maintenance IP address of the ZXHN H1600 is as follows:
IP address: 192.168.1.1
Subnet mask: 255.255.255.0
Default gateway: 192.168.1.1
Steps
1. Use an Ethernet cable to connect a local computer to the LAN interface of the ZXHN
H1600.
2. On the local computer, double-click
Local Area Connection
and click
Properties
.
The
Local Area Connection Properties
dialog box is displayed.
SJ-20200218145027-006 | 2021-03-04(R1.0)
3-1
