background image

 

 

Confidential and Proprietary Information of ZTE CORPORATION 11 

 

 

Wi-Fi function will be disabled. 

 

With USB connection, once no user connects to the device within 10 minutes and no action is 

performed to the device, or the WPS button is pressed manually, the Wi-Fi function will be 

disabled, and then unplug the USB cable, the device will enter the sleeping mode. 

In the sleeping mode, press any button or connect your device and PC with the USB cable to 

wake up the device, and the screen will be turned on. 

Warning and Notice 

To the Owner 

  Some  electronic  devices  are  susceptible  to  electromagnetic  interference  sent  by  your  device  if 

inadequately shielded, such as the electronic system of vehicles. Please consult the manufacturer of your 
device before using if necessary. 

 Operating  of  laptop  and desktop  PCs  and  your  device  may  interfere  with  medical  devices  like  hearing 

aids  and  pacemakers.  Please  always  keep  them  more  than  20  centimeters  away  from  such  medical 
devices  when  they  are  turned  on.  Turn  your  device  off  if  necessary.  Consult  a  physician  or  the 
manufacturer of the medical device before using your device. 

 Be aware of the usage limitation when using your device at places such as oil warehouses or chemical 

factories, where there are explosive gases or explosive products being processed. Turn off your device if 
required. 

 The  use  of  electronic  transmitting  devices  is  forbidden  in  aircrafts,  at  petrol  stations  and  in  hospitals. 

Please observe and obey all warning signs and switch off your device in these conditions. 

 Do not touch the inner antenna area if not necessary. Otherwise it will affect your device’s performance. 

 Store your device out of the reach of little children. Your device may cause injury if used as a toy. 

 Do not touch the metallic parts of your device so as to avoid a burn, when your device is working. 

Using Your Device 

 Please  use  original  accessories  or  accessories  that  are  authorized.  Using  any  unauthorized  accessories 

may affect your device’s performance, and violate related national regulations about telecom terminals. 

 Avoid  using  your  device  near  or  inside  metallic  structures  or  establishments  that  can  emit 

electromagnetic waves. Otherwise it may influence signal reception. 

 Your device is not waterproof. Please keep it dry and store in a shady and cool place. 

 Do not use your device immediately after a sudden temperature change. In such case, it will produce dew 

inside and outside your device, so don’t use it until it becomes dry. 

 Handle your device carefully. Do not drop, bend or strike it. Otherwise your device will be damaged. 

 No dismantling by non-professionals and only qualified technicians can undertake repair work. 

 Operating temperature range of 0

  ~ +35

  and humidity range of 5% ~ 95% are recommended. 

Using Battery 

 Do not short-circuit the battery, as this can cause excessive heat and fire. 

 Do not store battery in hot areas or dispose of it in a fire to avoid explosion. 

 Do not disassemble or modify the battery. 

• When not using the battery for a long period, remove it from the device and store it in a cool dry place. 

Содержание z


















Отзывы: