Page 19
Installation Guide
The installation and management software is pre-loaded onto your
USB modem. Wait for your system to be fully loaded then insert the
modem into your computer and follow the instructions on-screen.
You’ll be up and connected in about 5 minutes.
There are three main steps to the installation process:
1.
Device insertion; USB drivers are installed by your system
2.
Install shield launches and installs the Connection Manager
3.
Connection Manager launches and continues to install the
modem drivers and then initialises the modem
If nothing happens your system configuration may be preventing
Autorun.
Manual installation process
•
Browse to the device and select AutoRun to start the installation.
(Start > My Computer > ZTEMODEM > AutoRun.exe)
•
You can download the install files from
zte.co.nz
