28
WAN Port
Set the WAN port.
Protocol
Set which protocol will be used for filtering.
Status
Set how to handle the packet if it matches with the rule.
4. Click
Save Changes
to add the new filtering rule.
Portmapping
To set portmapping rules, follow the steps below:
1. Turn on the Portmapping.
2. Click
Add
.
3. Enter the related parameters as described in the following table.
Parameters
Description
Name
Enter a name for the rule.
WAN Port
Set the WAN port.
LAN IP Address
Enter the LAN IP address.
LAN Port
Set the LAN port.
Protocol
Set which protocol will be used for filtering.
4. Click
Save Changes
to add the new portmapping rule.
Customization
■ Select
Settings > Advanced Router > Customization
to enable or disable UPnP and Out of
Service Notification on this interface.