Zte MF605, Руководство пользователя

Страница: 16 / 30

16
2.6 Power Supply and Battery back-up
For normal operation connect the modem to the external power
adapter. In case of power failure or when there is no available external
power supply the modem will run on the rechargeable battery.
The battery is automatically charged when external power supply is
connected.
When the rechargeable battery is drained the BATT indicator will begin
to blink. Please connect the external power adapter.
Normal charge time is about 9 hours. It usually takes at least three
charge and discharge cycles for the battery to reach full capacity.
Please charge the battery fully and then allow it to discharge by
disconnecting the external power supply. Repeat this a few times to
condition to the battery and maximize its capacity.
2.7 Notes on Service and Coverage
If you cannot get service make sure:
•
You are in an area which has sufficient network coverage
•
You are using the correct (U)SIM card
•
You have entered your PIN or PUK code using the web interface
•
If the RSSI (Radio Signal Strength Indicator) LED is blinking
constantly then try moving the modem to another location.
•
Please wait 1-2 minutes for the modem to initialize, attach to the
network and obtain an IP address.