ZTE MF60 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 25
•
Broadcast Network Name(SSID)
: Disable or Enable(Default) this function. If
Enable
is selected, the
device broadcasts the SSID, and other devices can search and connect to it. When you select
Disable
,
other devices can not search out the SSID. If you want someone to connect, you need tell them the SSID,
and let them setup manually.
•
AP Isolation
: When
Enabled
is selected, each of your wireless clients will not be able to communicate
with each other.
•
Country Code
: Choose the right country code.
•
Frequency(Channel)
: Choose the appropriate channel to optimize the performance and coverage of
your wireless network.
•
Rate
: Choose the speed rate.
•
MAX Station Number:
Choose the maximum number of the stations which connect the AP
simultaneously.
Click
Apply
to confirm your configuration.
Security
Select
Settings > Wi-Fi Settings > Security
, the Security parameters are shown in the following figure:
Unless one of these encryption modes is selected, wireless transmissions to and from your wireless
network can be easily intercepted and interpreted by unauthorized users.
•
Security Mode
: The security modes are described below:
Mode
Description
OPEN
You can authenticate successfully with a SSID, whether it is valid or empty.
SHARED
The WLAN clients who have the same WEP key with wireless gateway can
pass the authentication and access the wireless network.
WPA-PSK
WPA Pre-Shared Key, Enter the Pre-Shared key as a plain text (ASCII)
