20
21
Click
Apply
to confirm your configuration.
APN Setting
Select
Settings > 4G Settings > APN Setting
, the APN parameters
are shown in the following figure:
•
Profile Selection
: Choose the desired profile name.
•
Profile Name
: Profile Name.
•
APN
: Access Point Name.
•
PDP Type
: Packet Data Protocol (PDP) Type IP is recommended
unless service provider instructs others.
•
PDP Setting
: PDP address mode. If a fixed IP address is given
by your service provider, select
Manual PDP
. Otherwise select
the
Auto PDP
and the router will automatically obtain this
parameter.
•
DNS
: If a fixed IP address is given by your service provider, then
choose
Manual DNS
. Otherwise, choose
Auto DNS
, and device
will automatically obtain parameters.
•
Authentication
: Password Authentication Protocol (PAP)
provides a simple method without encryption for the peer to
establish its identity using a 2-way handshake. Challenge-
Handshake Authentication Protocol (CHAP) is used to
periodically verify the identity of the peer using a 3-way
handshake.
•
User Name
: User name is used to obtain authentication from the
ISP when the connection is established
•
Password
: Password is used to obtain authentication from the
ISP when the connection is established.
Click
Set default
to set this profile as the default profile.
WAN Connection
In Cable Broadband mode
Click
WAN Connection
, you can configure how to connect to the
Internet.
Select WAN mode as
Static
,
DHCP
or
PPPoE
. If you select
PPPoE
mode, you need to input the
User Name
and
Password
supplied by
the network provider, and select the Connect mode.
•
Auto Connect
: The router will automatically connect to WAN
when it is powered on.
•
Manual Connect
: Connect to the Internet or disconnect from the
Internet manually.
Click
Apply
to confirm your configuration, and then the figure will
show in the wan connection status.
In 4G Gateway mode
Click
WAN Connection
, you can configure how to connect to the
Internet.
MF29T User Manual V1.1-0703.indd 20-21
2012-7-3 16:46:30
