Zte MF288 Скачать руководство пользователя страница 34

Страница: 34 / 37

ZTE MF288 User Guide

30 Confidential and Proprietary Information of ZTE CORPORATION

Limited Warranty

•

This warranty does not apply to defects or errors in the Product caused by:

i. Reasonable abrasion.

ii. End User’s failure to follow ZTE’s installation, operation or maintenance instructions or

procedures.

iii. End User’s mishandling, misuse, negligence, or improper installation, disassembly, storage,

servicing or operation of the Product.

iv. Modifications or repairs not made by ZTE or a ZTE-certified individual.

v. Power failures, surges, fire, flood, accidents, actions of third parties or other events outside

ZTE’s reasonable control.

vi. Usage of third-party products, or usage in conjunction with third-party products provided that

such defects are due to the combined usage.

vii. Any other cause beyond the range of normal usage intended for the Product.

End User shall have no right to reject or return the Product, or receive a refund for the Product

from ZTE under the above-mentioned situations.

•

This warranty is End User’s sole remedy and ZTE’s sole liability for defective or nonconforming

items, and is in lieu of all other warranties, expressed, implied or statutory, including but not

limited to the implied warranties of merchantability and fitness for a particular purpose, unless

otherwise required under the mandatory provisions of the law.

Limitation of Liability

ZTE shall not be liable for any loss of profits or indirect, special, incidental or consequential

damages resulting from or arising out of or in connection with using of this product, whether or

not ZTE had been advised, knew or should have known of the possibility of such damages,

including, but not limited to lost profits, interruption of business, cost of capital, cost of substitute

facilities or product, or any downtime cost.

FCC Compliance

This device complies with part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) this device must accept

any interference received, including interference that may cause undesired operation.

Caution: Changes or modifications not expressly approved by the manufacturer could void the

user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the

Содержание MF288






































Результаты поиска

Содержание MF288

Отзывы:

Похожие инструкции для MF288

Бренды по названию

Популярные бренды

Zte MF288, Руководство пользователя

Результаты поиска

Содержание MF288

Отзывы:

Похожие инструкции для MF288

Бренды по названию

Популярные бренды