Zte MF23, Руководство пользователя

Страница: 20 / 36

MF23 User Manual
16 Confidential and Proprietary Information of ZTE CORPORATION
•
AP Isolation : When Enabled is selected, each of your wireless clients will not be able to communicate
with each other.
•
BSSID : MAC address of the Wi-Fi.
•
Frequency(Channel) : Choose the appropriate channel to optimize the performance and coverage of
your wireless network.
•
WDS Mode : WDS enable router to communicate with other APs, WDS connection is two-way
communication, APs should know each others wireless MAC address. And make sure that all APs share
the same SSID and channel.
WDS configuration is shown below:
Step Description
1.Set the same SSID and channel for APs Manually set the SSID and channel is strongly
recommended.
2.Select WDS mode: Disable, Lazy Mode, Bridge Mode or
Repeater Mode ·If you select Disable , WDS is disabled.
·If you select Lazy Mode , WDS is enabled, and set
wireless MAC address only on the peer APs.
·If you select Bridge Mode , WDS is enabled, and set the
peer APs wireless MAC address on router. When you set
Bridge Mode , your PC can not search SSID of AP after
connected.
·If you select Repeater Mode , WDS is enabled, and set the
peer APs wireless MAC address on router. When you set
Repeater Mode , your PC can search SSID of AP after
connected.
3.Select Phy mode :
CCK,OFDM, HTMIX or GREENFIELD
CCK : 802.11b
OFDM : 802.11g
HTMIX : 802.11b/g/n Mixed Mode
GREENFIELD : 802.11b/g Mixed Mode
4.Select Encryp Type :
WEP, TKIP, AES
If you select NONE , all the data transmitted without
encryption, and other station can access router.
5.Set peer AP's wireless MAC address on router Only Repeater Mode and Bridge Mode need this.
The HT physical Mode parameters are shown below:
•
Operating Mode : In Mixed Mode , packets are transmitted with a preamble compatible with the legacy
802.11a/g, the rest of the packet has a new format. In Green Field , high throughput packets are
transmitted without a legacy compatible part.
•
Channel Bandwidth : Set the HT physical channel bandwidth.
•
Guard Interval : Guard interval is to introduce immunity to propagation delays, echoes and reflections,
to which digital data is normally very sensitive.
•
MCS : The Modulation and Coding Scheme (MCS) is a value that determines the modulation, coding and
number of spatial channels.
•
Reverse Direction Grant(RDG) : Enable RDG or not.
•
Extension Channel : Set extension channel. Extension channel is also able to send and receive data.
•
Aggregation MSDU(A-MSDU) :To enable Hyper Throughput TX Aggregate MAC Service Data Unit,
select Enable.
•
Auto Block ACK : Select to block ACK (Acknowledge Number) or not during data transferring.