ZTE-J G380 GoTa Digital Trunking Phone User Manual
34
Dial via PTT Speed Group
1. In standby mode, press the
Up / Down Keys
elect your desired PTT speed group.
2. Hold the
PTT Key
to make the PTT speed dial, and speak after hearing a beep sound; release the
PTT Key
to listen to the other party or back to the idle status.
Receive PTT Calls
When receiving PTT calls, you firstly hear a short beep sound, and then hear the other party
speaks without any operation. After the party finishes speaking, hold the
PTT Key
and speak after
hearing a beep sound. Release the
PTT Key
to listen to the other party, back to the idle status or quit
the authority to speak.
End / Exit PTT Calls
•
In private calls, press the
End Key
or select
End Call
to end a call.
•
In group calls, press the
End Key
to exit from a group call, select
End Call
to end group call.
Note:
The group caller or leader can select
End Call
to end a group call. Contact your network
service provider for detailed PTT call authorities.
Broadcast Call
Broadcast Call is an unilateral call. It broadcasts the call to the group members and the group
members can receive the call but not allow answering the call.
Operation Method
1. Enter “ ## ”, in standby mode;
2. Enter the group number of the call;
3. Hold
PTT key
to start the broadcast call and talk after hearing a beep sound.
