ZTE F100 User Manual
Confidential and Proprietary Information of ZTE CORPORATION 21
•
When asked, enter your PIN (Personal Identification Number) code or handset code and press
OK Key
to confirm.
Notes:
The PIN code is the password provided by your network service provider. You need this password to
use the (U)SIM card. When the entered PIN code or handset code is accepted, the phone will
automatically search for the designated network. After a few seconds, your phone will be in standby
mode.
•
To power off the phone, press and hold the
End Key
from the standby mode.
Warning:
Do not power on your phone if wireless phone use is prohibited, or when it may cause interference or
danger.
Standby Mode
When the phone is ready for use after the name of the service provider is displayed on the screen and you
have not entered any characters, the phone is in the standby mode:
1. Network name or the operator logo.
2. Indicators and icons. See
Introduction-Indicators and Icons
.
3. Function of
Left Soft Key
.
4. Function of
OK Key
.
5. Function of
Right Soft Key
.
Signal Strength
The signal strength icon shows on the top left corner of the screen. More bars indicate a stronger signal.
For example,
indicates strong signal.
Notes:
If the phone is not able to detect the designated network, or links to a network that you are not authorized
to use, the signal strength meter will show no bars. You will only be able to make emergency calls.
1
3
4
2
5
