7
INITIAL SET-UP
6
INITIAL SET-UP
CONNECT THE POWER CORD
Insert the small end of the
power cord into the
Power
Input
port on the back of
your device.
Plug the power cord into an
electrical wall outlet that is not
powered by a wall switch.
Slide the
On/Off Switch
to
the
On
position.
CHECK THE
WIRELESS SIGNAL
Raise the
Antenna
to an
upright position and check the
signal strength. More green
bars indicate a stronger signal.
Your device can be relocated
in your home for best
performance.
INITIAL SET-UP
INSERT THE BATTERY
INSTALL THE BATTERY COVER
The battery must be installed at all times for your Wireless
Home Phone Base to operate properly, even when plugged
into a power source. It may take 5 hours to fully charge. The
battery will charge inside the device while connected to a
power supply.
NOTE:
