Zte AT&T Radiant, Руководство пользователя

Страница: 36 / 44

For Your Safety For Your Safety 62 63
FCC Regulations
This mobile phone complies with part 15 of the FCC Rules . Operation is subject to
the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation .
This mobile phone has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules . These limits are designed
to provide reasonable protection against harmful interference in a residential
installation . This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications . However, there is no
guarantee that interference will not occur in a particular installation . If this
equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna .
• Increase the separation between the equipment and receiver .
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected .
• Consult the dealer or an experienced radio/TV technician for help .
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user‘s authority to operate the
equipment .
RF Exposure Information (SAR)
This phone is designed and manufactured not to exceed the emission limits for
exposure to radio frequency (RF) energy set by the Federal Communications
Commission of the United States, Industry Canada of Canada .
During SAR testing, this device was set to transmit at its highest certified power
level in all tested frequency bands, and placed in positions that simulate RF
exposure in usage against the head with no separation, and near the body with the
separation of 0 .4 inches (10 mm) . Although the SAR is determined at the highest
certified power level, the actual SAR level of the device while operating can be well
below the maximum value . This is because the phone is designed to operate at
multiple power levels so as to use only the power required to reach the network .
In general, the closer you are to a wireless base station antenna, the lower the
power output .
The exposure standard for wireless devices employing a unit of measurement is
known as the Specific Absorption Rate, or SAR . The SAR limit set by the FCC is
1.6W/kg, and 1.6W/kg by Industry Canada .
This device is complied with SAR for general population/uncontrolled exposure
limits in ANSI/IEEE C95 .1-1992 and Canada RSS 102, and had been tested in
accordance with the measurement methods and procedures specified in OET
Bulletin 65 Supplement C, and Canada RSS 102 . This device has been tested, and
meets the FCC, IC RF exposure guidelines when tested with the device directly
contacted to the body .
The FCC has granted an Equipment Authorization for this model phone with
all reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines . SAR information on this model phone is on file with the FCC and can be
found under the Display Grant section of www .fcc .gov/oet/ea/fccid after searching
on
FCC ID: Q78-Radiant
.
For this device, the highest reported SAR value for usage against the head is
1.05 W/kg , for usage near the body is 1.13 W/kg .