91
“
Data call type
”: to set the type of data call as
“Analog” or “ISDN”.
“
Data call speed
”: The data connection speed
can be set as 2400, 4800, 9600 or 14400.
“
User ID
”: to set the user ID of the dial-up server
(not the WAP gateway).
“
Password
”: to set the password needed by the
dial-up server (not the WAP gateway) to
recognize your identity.
“
Timeout
”: You can set a time limit. If there is no
data entered or transferred beyond this time limit
the service will automatically turn off. The timeout
period may be set for “30 secs”, “60 secs” or “120
secs”.
“
GPRS Settings
”: if the “
Bearer
” is set as “
GPRS
”
then the next neighbouring menu to “
Bearer
” is “
GPRS
Settings
”. Press the
left soft key
“
SELECT
” to enter
the following settings (
GPRS
service requires network
support. Before using, please confirm with your
network operator that
GPRS
service has been
activated for you and that your mobile phone is located
in an area covered by the
GPRS
network. At such a
time, a “
G
” will appear on the right side of the network
signal strength bar.):
