background image

Initial Setup

:

When first connecting your LUNCHBOX 

Acoustic

, before power is applied, please be sure to set 

the controls as follows:

•  REVERB set to off. (Fully counter-clockwise.)

•  BASS set to mid-point. (12 o’clock position.)

•  TREBLE set to mid-point. (12 o’clock position.)

•  VOLUME set to off. (Fully counter-clockwise.)

•  GAIN set to mid-point. (12 o’clock position.)

•  FEEDBACK CUT set to off. (Fully counter-clockwise.)

•  SPEAKER switch on rear panel set to “Internal” position. (Towards left side.)

•  Now you can apply power, and turn up your instrument and/or microphone to the desired 

level using the VOLUME knob.

Gain and Volume:

Normal adjustments to the sound level should be made using the master VOLUME control only. 
This knob affects the signal levels going into the LUNCHBOX 

Acoustic’s

 high-power amplifier. It 

does not affect the electrical level at the EFX SEND jack, but will affect the sound level of all other 
outputs (Internal or External Speaker, and Headphones).

The GAIN controls are used to set the input sensitivity of each channel. In most cases, these 
controls should be set high up, generally above the 50% point of their ranges. This will assure a 
good tone, and low operating noise. Of course, you might have to adjust the GAIN controls to feed 
your favorite effects properly.

The key to low noise is to keep the GAIN knob high, and use the VOLUME knob to adjust your 
sound level.

Bass and Treble:

The LUNCHBOX 

Acoustic

 features separate BASS and TREBLE controls for Instrument 

and Microphone channels. At ZT, we don’t take these features lightly. We studied classic and 
modern tone controls, noting each one’s strengths and weaknesses. In the spirit of the original 
LUNCHBOX amp, the LUNCHBOX 

Acoustic

 provides an extraordinarily wide palette of tones 

using simple controls, giving you quick access to just the sound you seek.

Reverb:

The LUNCHBOX 

Acoustic’s

 REVERB effect is a traditional plate style reverb that simulates the 

echo and decay of sound reflections in a room or hall. You can adjust the amount of REVERB 
on both the Instrument and Microphone channels from the top panel. ZT’s proprietary dynamic 
processing handles other sonic features as you play, but we give you the flexibility to separately 
control this primary sonic flavor.

Содержание LBA1












Отзывы: