SECTION I: INSTALLING BATTERIES
Before your Zspire mouse is ready to drive, you will need to install the batteries.
Your Zspire mouse uses two AAA batteries included.
Remove the battery cover. The battery cover is located on the bottom of the
mouse.
Insert the batteries with the proper positive/negative configuration. Place the
negative side of the battery (the non-pointy end) against the spring. Do not
worry if the batteries do not exactly line up before you replace the cover. The
battery cover has been designed to force the batteries into the proper con-
figuration.
Replace the battery cover so the
slot on the cover is closest to the
lens of the mouse (otherwise you
will have a difficult time replacing
the batteries next time!)
The Zspire mouse is now ready
for configuration and operation.
See the “Battery Precautions”
section of this guide for addi-
tional information regarding the
batteries for your Zspire mouse.