MA1171 Multi-function attachment
Arms (Laptops, Tablets, Ipads &
Smartphones Holders)
5
Insert Tablet/smart phone
adapter to notch, screw on.
•
8
Place laptop adapter align with
hole pattern(A), then install
universal Joint(B), screw nut
(C), tighten Clamp Screw (D).
6
Slip device holder onto the
adapter. Tilt can be adjusted
and fixed with
4
mm Hex key.
7
Pull the holder open and
place your device into it.
l
--�
Attention: Slide out laptop
holder by Pressing the button
underneath.
9
Slide Laptop holder into universal
1 0
Snap plate clip shoe from
11
Place laptop well and adjust
Joint(B), tighten clamp screw.
central notch to both side, then
both edges, lock laptop in.
slide adjustable clasp along
press plate clips to fix laptop.
the grooves.
*For pre-assembled armrest, u
n
bolt
four bolts fixing armrest under seat base on the side you wish to install.
3.For Installation on Chairs
with Armrests:
1
Insert chair mounting base,
so it covers armrest mount.
R
e
-
tighten
4
bolts you toke out.
Make sure to align all bolt holes.
2
U
se
6
mm Hex Key to unbolt
and separate base stem from
desk mount base.
3
C
onne
c
t
ba
se ste
m
a
n
d
c
h
ai
r
mount with bolt from last step.
Thank you for purchasing with ZQRacing. If you have any question regards to your
purchase or installation. Please feel free to contact us on 1300 977 224 or email:
MA1171 Multi-funtion attachment arms fit most ZQRacing Chairs with armrests.
Additional desk mount included, the arms could be fitted to desk if needed.
4
insert arm into the base stem,
fix with nylon clip at desired height.
Mobile & Tablet Holder
Large
Tablet &Laptop
Holder
A
B
C
D
B
