5
Configure network parameters
NOTE
: Skip to
step 6
if you have a DHCP
environment. DHCP is the default IP
configuration. If no DHCP server is available,
please log in to Nodegrid SR via its console or
HDMI port using
admin
credentials and
configure a static IP address using CLI
instructions as follows:
[admin@nodegrid /]#
cd
settings/network_connections/ETH0/
[admin@nodegrid ETH0]#
set ipv4_mode=static
[admin@nodegrid ETH0]#
set ipv4_address=10.0.0.10
[admin@nodegrid ETH0]#
set ipv4_bitmask=24
[admin@nodegrid ETH0]#
set ipv4_gateway=10.0.0.1
[admin@nodegrid ETH0]#
show
name: ETH0
type: ethernet
ethernet_interface = eth0
connect_automatically = yes
set_as_primary_connection = yes
enable_lldp = no
ipv4_mode = static
ipv4_address = 10.0.0.10
ipv4_bitmask = 24
ipv4_gateway = 10.0.0.1
ipv4_dns_server =
ipv4_dns_search =
ipv6_mode = address_auto_configuration
ipv6_dns_server =
ipv6_dns_search =
[admin@nodegrid eth0]#
commit
[admin@nodegrid eth0]#
exit
Login as root to change the root password.
6
Configure serial, network & USB devices
Note
: Your NSR will respond over the network
at
192.168.160.10
if your DHCP server fails or is
unavailable.
Note:
To check your current IP address, connect
to the NSR console port and hit
Enter
at the
login prompt until you see the IP address of
ETH0 interface.
To configure the NSR for the first time via
Network:
a) Open a web browser (HTTP/S) and
enter its IP address in the address field.
Or start an SSH session to your NSR’s IP
address.
b) Log in to your NSR as
admin.
c) Set your NSR basic configuration:
- Security
Security, Services
page: Select the
desired services and Ports,
cryptographic protocols and cipher
suite levels. Click
Save
when finished.
Authentication
page: add your Remote
Authentication servers (AD, LDAP,
, Radius and/or Kerberos).
Authorization
page: create users
groups, set profiles and assign devices
- Network
Network settings tab: Set your desired
Network and Interfaces parameters.
Click
Save
for each submenu.
- Change Admin Password
At any time, click
in the upper right corner of your
screen and click “Change Password” to
change your system password.
d) NSR modules
- Serial & USB
Managed Devices, Devices page: Select
serial and/or USB ports checkboxes
and click “Edit.” Set your preferences
and click
Save
when finished.
- Ethernet
Network, Switch page: select the
interfaces’ checkboxes and click on
“Edit”. Set your preferences and click
Save
when finished.
- Other modules: please refer to the
Nodegrid SR User Guide.
Congratulations!
Your Nodegrid SR is now configured
and ready to accept users and
connections to its ports and interfaces.
7
Additional Configuration
NOTE:
We recommend that you set up
a
new
Administrator account (in
admin
group with full privileges) and use the
new account instead of the default
admin
account.
Add New Users
Click Security tab, Local Accounts, Add,
set options,
Save.
Alerts & logging
Set and send alerts by email, SMS,
and/or SNMP.
Power
Control network attached PDU power
strips and server, network and storage
devices.
For advanced configuration options,
how-tos and tips please refer to your
Nodegrid SR User Guide.
8
Get technical updates
To automatically receive future
firmware updates and technical
information, sign up here:
www.zpesystems.com/loop/
Quick Start Guide for Nodegrid Services Router
Contact ZPE Technical Support at [email protected]
TM
Nodegrid Services Router
