The Nodegrid Services
Router (NSR) provides
extensive access to the
devices attached to this
equipment. As a result,
care must be taken to
avoid compromising your
security policies.
From the factory, this
equipment is shipped
with the following
settings:
•
DHCP, SSHv2, HTTPS –
ENABLED
•
All Serial, USB, SFP+
and switch ports –
DISABLED
•
Ethernet – ENABLED
•
Two default users with
passwords:
–
root
/
root
–
admin
/
admin
ZPE recommends
changing the default
passwords of admin and
root, as well as carefully
configuring security
settings immediately after
initial setup.
Please consult the
NSR
User Guide
for more
information on security
settings.
Quick Start Guide for Nodegrid Services Router
Security Warning
For manual downloads and support, visit:
www.zpesystems.com/document-library/
For further assistance please contact ZPE Technical Support.
1
Rack mount your NSR
For detailed rack mounting instructions, see
the
NSR User Guide
.
2
Connect to your network
Connect a ZPE-recommended
CAT 5e or CAT 6 cable from the
10/100/1000BaseT port to your network.
You may connect to either or both network
ports for redundancy.
3
Connect to the Serial Console port
Using the ZPE’s RJ-45 console adaptor,
connect a terminal or workstation to the
serial console port on the NSR. The NSR will
be configured using a terminal or terminal
emulator with session settings of: 115200,
8, N,1, with no flow control.
Alternatively, use the HDMI port.
4
Connect power cables and turn NSR on
Connect the power cables to the appliance.
Turn on the power switches.
Nodegrid Services Router shown
TM
Nodegrid Services Router
Dual AC power
Console
HDMI
1
2
4
3
By installing, copying, or otherwise using this device, you agree to be bound by the terms of the licensing, maintenance and sale agreements set forth on
www.zpesystems.com/docs/legal. if you do not agree to the terms of those agreements, do not install or use the Hardware and/or Software Product(s).
Rack Mounting
3
Slot #1
Slot #2
Slot #3
Slot #4
Slot #5
Dual
SFP+ GbE
Front
Back
Note
: All remaining manual setup steps are required the first time you configure your NSR.
Dual DC power option
Single DC + DC PoE option
Single AC + AC PoE option
DC options
DC options
DC PoE
DC
DC 2
DC 1
AC
AC PoE
