Zotac Intel NM70-ITX Series, Руководство пользователя

Страница: 9 / 42

8
Intel NM70-ITX series Motherboard
Hardware Installation
This section will guide you through the installation of the motherboard. The topics covered in this
section are:
q
Installing Memory Modules
q
Installing the Motherboard
q
Connecting Cables and Setting Switches
Safety Instructions
To reduce the risk of fire, electric shock, and injury, always follow basic safety precautions.
Remember to remove power from your computer by disconnecting the AC main source before
removing or installing any equipment from/to the computer chassis.
+
120 240
121
120
240
121
1.5V 1.5V
DDRIII1
DDRIII2
Installing Memory Modules
Your new motherboard has two 1.5V 240-pin slots for DDR3 memory. These slots support 1
GB/2 GB/4 GB/8 GB DDR3 devices. There must be at least one memory bank populated to
ensure normal operation. Refer to the following recommendations to install memory modules.
Note that a memory module has a notch, so it can only fit in one direction. Refer to the following
procedure to install memory modules into the slots on the motherboard.
1. Unlock a DIMM slot by pressing the module clips outward.
2. Align the memory module to the DIMM slot, and insert the module vertically into the
slot. The plastic clips at both sides of the slot automatically lock the DIMM into the
connector.