Zotac Intel NM70-ITX Series, Руководство пользователя

Страница: 17 / 42

16
Intel NM70-ITX series Motherboard
Jumper Settings
This section explains how to configure the motherboard’s hardware. Before using your
computer, make sure all jumpers and DRAM modules are set correctly. Refer to this section
whenever in doubt.
CMOS Clear Jumper-JP1
Close Open * = Default setting.
If you want to clear the system configuration, use the JP1 (Clear CMOS Jumper) to clear data.
Notice :
1. Be sure to save the CMOS setting when exit the CMOS.
2. If the CPU is frequency multiplier locked, no CPU speed change will be seen even if the
frequency multiplier setting in CMOS setup is changed.
JP1 Selection
1-2* Normal *
2-3 CMOS Clear
1
1
Case Open Jumper-JP5
JP5 Selection
Open Case close
Short Case open
Keyboard Power Selection for Wakeup-JP2
JP2 Selection
1-2 Power off in S3/S4/S5
2-3* Power on in any state *
1
1