Zotac H55 series, Руководство пользователя

Страница: 21 / 46

20
Intel H55 series Motherboard
q
MPS and ACPI MADT ordering
Use this item to set MPS and ACPI MADT ordering. There are two options in this
item: [Legacy ordering] for Windows 2000 or earlier OSes, and [Modern ordering]
for Windows XP or later OSes.
q
Max CPUID Value Limit
Allows you to determine whether to limit CPUID maximum value. Set this item
to [Disable] Windows XP operating system; set this item to [Enable] for legacy
operating system such as Windows NT4.0..
q
Intel(R) Virtualization Tech
Hardware Virtualization Technology enables processor feature for running multiple
simultaneous virtual machines allowing specialized software applications to run in
full isolation of each other.
q
Execute-Disable Bit Capability
This function enhances protection of your computer , reducing exposure to viruses
and malicious buffer overflow attacks when working with its supporting software
and system.
q
Intel(R) HT Technology
This item allows you to enable or disable Intel® Hyper-Threading technology
support.
q
Active Processor Cores
This item allows you to choose the number of the active processor cores. The
default value is [All].
q
A20M
This item allows you to enable or disable A20M.
q
Intel(R) SpeedStep(tm) tech
Use this option to enable or disable Intel® SpeedStep
TM
Technology.
q
Intel(R) C-STATE tech
Use this option to enable or disable Intel® C-STATE Technology.
IDE Configuration
The items in this menu allow you to set or change the configurations for the IDE
devices installed in the system. Press <enter>to display the configuration options:
q
Configure SATA as
This item allows you to set the SATA to IDE/AHCI mode.
q
SATA#1/2 IDE Configuration
The items allow you to configure SATA#1/2.
q
Primary, Second, Third and Fourth IDE Master/Slave
This displays the status of auto detection of IDE devices.
q
Hard Disk Write Protect
This item will be effective only if device is accessed through BIOS.
q
IDE Detect Time Out (Sec)
The item allows you to select the time out value for detecting ATA/ATAPI devices.
q
ATA(PI) 80pin cable detection
The item allows you to select the mechanism for detecting 80pin ATA(PI) cable.
AHCI Configuration
The items in this menu allow you to set general AHCI configuration.