Zotac D2550ITX Series, Руководство пользователя

Страница: 12 / 50

11
Hardware Installation
Installing Memory Modules
Your new motherboard has two 1.5V 204-pin slots for SO-DIMM DDR3 memory. These slots
support 1 GB/2 GB DDR3 devices. There must be at least one memory bank populated to ensure
normal operation. Refer to the following recommendations to install memory modules.
Note that a memory module has a notch, so it can only fit in one direction. Refer to the following
procedure to install memory modules into the slots on the motherboard.
1. Unlock a SO-DIMM slot by pressing the module clips outward.
2. Align the memory module to the SO-DIMM slot, and insert the module vertically into the
slot. The plastic clips at both sides of the slot automatically lock the SO-DIMM into the
connector.
Note: When installing only one SO-DIMM DDR3 module, please insert it into the DDRIII-2
slot.
1
.5
V
1
.5
V
DDRIII-1
DDRIII-2