This product can be included and operated in any Z-Wave
network with other Z-Wave certified devices from other
manufacturers and/or other applications. All non-battery
operated nodes within the network will act as repeaters
regardless of vendor to increase reliability of the network.
This product features the latest Security 2 (S2) framework
to remove smart home network hacking risks. This device
is equipped with a unique authentication code for trusted
wireless communication.
Ÿ
This product should be installed indoors or outdoors
in a sheltered area upon completion of any building
renovations
.
WARNING
COMMAND CLASSES
This device requires the following
command classes
to
be supported and recognized by your Z-Wave
controller:
COMMAND_CLASS_ZWAVEPLUS_INFO_V2
COMMAND_CLASS_ASSOCIATION_V2
COMMAND_CLASS_ASSOCIATION_GRP_INFO
COMMAND_CLASS_TRANSPORT_SERVICE_V2
COMMAND_CLASS_VERSION_V2
COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
COMMAND_CLASS_DEVICE_RESET_LOCALLY
COMMAND_CLASS_POWERLEVEL
COMMAND_CLASS_SECURITY
COMMAND_CLASS_SECURITY_2
COMMAND_CLASS_SUPERVISION
COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
COMMAND_CLASS_BATTERY
COMMAND_CLASS_WAKE_UP_V2
COMMAND_CLASS_NOTIFICATION_V4
S2
IN NO EVENT SHALL ZOOZ OR ITS SUBSIDIARIES AND AFFILIATES BE LIABLE
FOR ANY INDIRECT, INCIDENTAL, PUNITIVE, SPECIAL, OR CONSEQUENTIAL
DAMAGES, OR DAMAGES FOR LOSS OF PROFITS, REVENUE, OR USE
INCURRED BY CUSTOMER OR ANY THIRD PARTY, WHE-THER IN AN ACTION IN
CONTRACT, OR OTHERWISE EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
DA-MAGES. ZOOZ'S LIABILITY AND CUSTOMER'S EXCLUSIVE REMEDY FOR
ANY CAUSE OF ACTION ARISING IN CON-NECTION WITH THIS AGREEMENT
OR THE SALE OR USE OF THE PRODUCTS, WHETHER BASED ON
NEGLIGENCE, STRICT LIABILITY, BREACH OF WARRANTY, BREACH OF
AGREEMENT, OR EQUITABLE PRINCIPLES, IS EXPRESSLY LIMITED TO, AT
ZOOZ'S OPTION, REPLACEMENT OF, OR REPAYMENT OF THE PURCHASE
PRICE FOR THAT POR-TION OF PRODUCTS WITH RESPECT TO WHICH DA-
MAGES ARE CLAIMED. ALL CLAIMS OF ANY KIND ARISING IN CONNECTION
WITH THIS AGREEMENT OR THE SALE OR USE OF PRODUCTS SHALL BE
DEEMED WAIVED UNLESS MADE IN WRITING WITHIN THIRTY (30) DAYS FROM
ZOOZ'S DELIVERY, OR THE DATE FIXED FOR DELI-VERY IN THE EVENT OF
NONDELIVERY.
FCC NOTE
THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY
TO OPERATE THE EQUIPMENT. STORE INDOORS WHEN NOT IN USE.
SUITABLE FOR DRY LOCATIONS ONLY. DO NOT IMMERSE IN WATER. NOT FOR
USE WHERE DIRECTLY EXPOSED TO WATER.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following conditions:
1. This device may not cause harmful interference,
2. This device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used according to instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in any given
installation.
If this equipment causes harmful interference to radio or television
reception, the user may try to correct the interference by taking one or more
of the following measures:
- Reorient or relocate receiving antenna
- Increase the separation between equipment and receiver
- Connect equipment into a separate outlet or circuit from receiver
- Consult the dealer or an experienced radio/TV technician for additional
assistance
All brand names displayed are trademarks of their respective holders.
© Zooz 2018
WARRANTY
This product is covered under a 12-month limited
warranty. To read the full warranty policy or file a
warranty claim, please go to ww.getzooz.com/warranty
1. MARK HOLES
Use the back cover to mark 2 mounting holes on a dry
clean surface 6 feet above ground.
2. INSTALL BACK COVER
Drill holes and use the supplied anchors and
screws to fix the back cover to the wall.
3. MOUNT SENSOR
Attach the sensor to the back
cover with the original screws.
It will go from TEST mode to
NORMAL mode within
10 seconds.
Questions?
3
0 FEET
100º
100º
Find a sheltered area within Z-Wave range to install the
sensor. It should be a clean flat surface without direct
sunshine or rain exposure (a little drizzle is fine).
Make
sure you test the sensor before mounting it.
A FEW TIPS:
Ÿ
The sensor best detects movement to the sides of
the lens rather than activity directly in front of it
Ÿ
Mount it 6 feet above the ground
Ÿ
Don’t position it facing a window, direct sunlight, or
above any source of heat (radiator, boiler, etc.)
PROGRAMMING
The sensor works in 2 modes:
1. TEST MODE
when it’s not mounted on the wall and
the tamper switch isn’t pressed. The LED indicator will
then flash every time motion is detected. Use this mode
to make sure the mounting location for your sensor is
within Z-Wave range and to optimize positioning for
motion detection. Turn the timer and lux knobs all the
way to the le to launch test mode for the sensor. It will
now report motion and trigger associated Z-Wave lights
anytime movement is detected (regardless of daylight
and as o en as every 5 seconds). Remember to adjust
the knobs when exiting test mode.
TEST MODE
MIN 5 SEC
MAX 12 MIN
MAX 200 LUX
MIN 30 LUX
2. NORMAL MODE
when the sensor is mounted on the
wall and the tamper switch is pressed in for at least 10
seconds. The LED indicator will NOT flash when motion
is detected to save battery. The sensor will send motion
alerts and trigger connected lights according to the
timer and lux knob settings. If the
LED
indicator
flashes
when motion is detected in normal mode, it means
LOW BATTERY.
NOTE:
You can only program the sensor using the
knobs. The sensor is not configurable via Z-Wave so
there are no advanced settings you can adjust to
customize it from the hub or the Z-Wave interface. We
wanted to keep it as simple as possible!
Ÿ
Prior to installation, the device should be stored in a
dry, dust-and-mold-proof place
.
Ÿ
Do not install the device in a place with direct sun
exposure, high temperature
,
or humidity
.
Ÿ
Keep away from chemicals, water, and dust
.
Ÿ
Ensure the device is never close to any heat source or
open flame to prevent fire
.
Ÿ
No part of the device may be replaced or repaired by
the user except for the batteries.
PAGE
3
PAGE
4
MOUNTING
