background image

 

 

Size: 4 byte dec. 
 
Energy Report Frequency 
Parameter 172: Choose how often you want your Smart Plug to report energy usage (KWH) to 
your controller and associated device. The number entered as value corresponds to the 
number of seconds. So if 300 is entered by default, the smart plug will report energy usage 
every 300 seconds (5 minutes). 
Values: 5 – 2678400; 0 – disabled (it will not report energy usage); 300 – default setting  
Size: 4 byte dec. 
 
Voltage Report Frequency 
Parameter 173: Choose how often you want your Smart Plug to report voltage (V) to your 
controller and associated device. The number entered as value corresponds to the number of 
seconds. 
Values: 5 – 2678400; 0 – disabled (default – it will not report voltage levels)  
Size: 4 byte dec. 
 
Electricity Report Frequency 
Parameter 174: Choose how often you want your Smart Plug to report levels of electrical 
current (A) to your controller and associated device. The number entered as value 
corresponds to the number of seconds. 
Values: 5 – 2678400; 0 – disabled (default – it will not report electrical current levels)  
Size: 4 byte dec. 
 
 
WARNING 
- This product should be installed indoors upon completion of any building renovations 
- Prior to installation, the device should be stored in a dry, dust-and-mold-proof place 
- Do not install the smart plug in a place with direct sun exposure, high temperature or 
humidity 
- Keep away from chemicals, water, and dust 
- Ensure the device is never close to any heat source or open flame to prevent fire  
- Ensure the device is connected to an electric power source that does not exceed the 
maximum load power 
- No part of the device may be replaced or repaired by the user 
 
Z-WAVE PLUS CERTIFIED 
This product can be included and operated in any Z-Wave network with other Z-Wave 
certified devices from other manufacturers and/or other applications. All non-battery 
operated nodes within the network will act as repeaters regardless of vendor to increase 
reliability of the network. 
 
ETL CERTIFIED  
This is an ETL certified device. ETL, just like UL, is a Nationally Recognized Testing Laboratory. 
The ETL mark is proof of product compliance to North American safety standards. 
 
WARRANTY 
This Limited Warranty applies to physical goods, and only for physical goods, purchased from 
Zooz (the "Physical Goods"). 
 

Содержание Z-WAVE SMART PLUG










Отзывы: